Assembly Of The Clutch Drum; Installation Of The Sprocket - Rotax 125 MAX evo Repair Manual

Figure 7.19: Starter gear assy.
______________________________________________________

ASSEMBLY OF THE CLUTCH DRUM

INSTALLATION OF THE SPROCKET

Special tools The following special tools and equipment are required:
Instruction See
1. Fix fixation tool for sprocket (1) in a vise.
2. Remove LOCTITE residue from the clutch drum (4) and the hex. nut (5).
3. Position clutch drum (4) on the sprocket (2) with needle pin (3).
4. Tighten hex. nut (5) and secure with LOCTITE 648. Tightening torque 100 Nm (74 ft.lb).
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
BRP-Rotax
REPAIR MANUAL
Starter gear assy.
1
Fixation tool (starter gear)
3
5 Allen screw M6x12
Part no.
944231
277362
899788
Figure: Fixation tool
2 Hex. nut M28x1
4 Clutch
Description
Locating/locking device
Locating/locking device
LOCTITE 648
Field of application
Clutch drum
Clutch drum
Hex. nut
Chapter 7
Page 19