Figure 7.6
______________________________________________________
REMOVAL OF THE SPROCKET
Instruction
See
1. Fix fixation tool for sprocket (1) in a vise.
2. Insert clutch drum (4) with installed sprocket (2) into the corresponding toothed cutout.
3. Unscrew the hex nut (5) for the sprocket.
4. Remove the sprocket from the clutch drum.
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
BRP-Rotax
REPAIR MANUAL
1
Hex. nut M10x1
3
Clutch drum
O-ring
5
Figure: Fixation tool
2
Thrust washer
Needle cage / Plain bearing
4
6
Thrust washer 15.2
Chapter 7
Page 7