Cylinder Removal - Rotax 125 MAX evo Repair Manual

General
Danger of severe burns and scalds! Always allow the engine to cool down to am-
N N O O T T E E
If only the components in the crankcase are to be replaced or inspected, then the
cylinder can be removed completely together with the following parts:
•
•
•
•
•
The exhaust socket, carburetor flange and exhaust valve remain installed.
Preparation The following preparation is required before removal:
• Removal of the radiator and radiator hoses. See also Chapter 3.
• Removal of the carburetor and intake silencer. See also Chapter 6.
• Removal of the exhaust system. See also Chapter 8.
Instructions
Special tools The following special tools and equipment are required:
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
REPAIR MANUAL

CYLINDER REMOVAL

bient temperature before starting any work.
______________________________________________________
Cylinder head cover
Intake socket
E-Rave
Exhaust socket assy.
Spark plug
______________________________________________________
Drain the coolant from the cylinder and invert the engine to prevent entry of water into
Do not damage the piston, piston ring and wall when dismantling these components.
Part no.
676110
BRP-Rotax
m WARNING
ATTENTION
the crankcase.
ATTENTION
Description
Socket set
Field of application
Cylinder
Chapter 4
Page 3