INSTALLATION OF THE COOLING WATER HOSES
Preparation
1. Mount radiator bracket (5) on radiator through the holes with rubber grommets and tighten
with Allen srew M6x20 and washer 6.2.
Figure 8.5: Preparation for radiator installation
______________________________________________________
2. Fit the cooling water hoses (1) to the radiator connection (2) and align with the port on the
engine, then tighten the hose clamps (3) to make it watertight.
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
REPAIR MANUAL
INSTALLING THE RADIATOR
1
Radiator
Allen screw M6x20 with rounded flange
3
head
5
Radiator bracket
BRP-Rotax
2
4
Rubber grommet
Washer 6.2
Chapter 8
Page 7