Special tools
The following special tools and equipment are required:
Instructions
See
N N O O T T E E
Use two hex. screws to separate the case halves
1. Unscrew all M6 case bolts and remove them.
2. Remove engine housing from trestle mounting plate.
3. Screw Allen screws (1,2) evenly into the extraction thread and press the case halves evenly
apart.
Figure 5.6: Crankcase
1,2
______________________________________________________
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
BRP-Rotax
REPAIR MANUAL
DISASSEMBLING THE CRANKCASE
Part no.
276016
n.a.
Figure:
Crankcase.
Allen screws
Description
Puller assembly
Plastic hammer
Field of application
Case halves
Crankshaft
Chapter 5
Page 9