Safety
instructions
structions. All screws and nuts must always be clean. Inspect surfaces and threads for
REMOVING THE ENGINE FROM THE TRESTLE MOUNTING PLATE
Instructions
Proceed as follows to remove the engine from the trestle mounting plate:
1. The engine is removed in reverse order of positioning.
See also Chapter
INSTALLATION OF THE ENGINE ON KART CHASSIS
Safety
instructions
For the Installation of the engine on kart chassis, see latest current Installation and Opera-
tors Manual of the engine type 125 MAX.
INSTALLATION OF THE FUEL LINE
Safety
instructions
When handling with fuel, do not smoke or allow open flames. Gasoline and gasoline va-
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
REPAIR MANUAL
PREPARATION FOR INSTALLATION
Clean and inspect disassembled parts and assemble them in accordance with the in-
damage. In case of doubt use new screws and nuts.
Positioning the engine on the trestle mounting
Non-compliance can result in serious injuries or death!
Before installing the engine on the chassis the Installation and Operators Manual for
the engine and the installation instructions of the chassis manufacturer must be read
Non-compliance can result in serious injuries or death!
por are highly flammable and explosive under certain conditions.
Make sure that fuel will not splash onto hot engine components or equipment.
BRP-Rotax
ATTENTION
m WARNING
and understood.
m WARNING
m WARNING
Risk of fire and explosion!
plate.
Chapter 9
Page 7