Rotax 125 MAX evo Repair Manual page 22

Inspect fuel filter for dirt, replace if
required.
Inspect fuel screen from the
carburetor.
Inspect exhaust system for sealing
and tightness, lubricate with oil to pre-
vent corrosion.
Replace the silencer matting in the ex-
haust system.
Clean the exhaust valve and check for
free movement.
Check the oil level, top up if necessary.
Renew gear oil.
Inspect for wear, replace if necessary.
Inspect clutch drum needle bearing for
wear, replace if necessary.
Clean the sealing groove in the starter
gear assy.
Engine inspection by authorized serv-
ice center, replace defective parts.
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
BRP-Rotax
REPAIR MANUAL
Points of inspection
Inspection, remedial action
Interval
Operating
hours
as indicated
4) Fuel system
Inspect before
every operation
of vehicle
Every 10 hours
of operation
5) Exhaust system
Inspect before
every operation
of vehicle
Every 10 hours
of operation
6) Outlet control
Every 10 hours
of operation
7) Gearbox
Every 2 hours of
operation
Every 5 hours of
operation
8) Starter drive
Every 50 hours
of operation (de-
pending on the
conditions of
use)
9) Clutch
Every 10 hours
of operation
Every 10 hours
of operation
10) Engine inspection
Every 50 hours
of operation
Chapter
Reference
Chapter 2
Page 11