Carburetor And Intake Silencer - Inspection Of Components; Inspection Of Carburetor - Rotax 125 MAX evo Repair Manual

CARBURETOR AND INTAKE SILENCER – INSPECTION OF
In the case of problems with the fuel supply the carburetor should be checked:
First the components should be cleaned and then inspected.
INSPECTION OF THE CARBURETOR
Instruction See
1. Clean the fuel filter (1) and make sure that it is in good condition.
2. Blow compressed air through the holes in the carburetor housing (2) and the jets (3, 4, 5, 6
and 7) and make sure that there is no pollution to have an easy and free flow.
3. Check that the clip (8) is tightly seated on the jet needle (9).
Figure 6.6: Carburetor
______________________________________________________
Chapter 6
Page 8
BRP-Rotax
REPAIR MANUAL
COMPONENTS
Figure: Carburetor.
1 Fuel filter
Needle jet DP 267
3
Main jet
5
Needle valve 150 (standard) 200
7
(optional)
9 Jet needle K 57
Carburetor housing
2
Idling and starter jets
4
Main jet cup
6
Clip
8
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0