RADIATOR – INSPECTION OF COMPONENTS
Instruction
See
N N O O T T E E
If some of the cooling fins are slightly bent, they may be gently bent back into
shape.
1. Use compressed air to remove dirt from the cooling fins of the radiator. Never use a high-
pressure cleaner.
2. Visual check of the radiator assy. for any cracks or other damage.
3. Check that the radiator cap gasket is in perfect condition.
4. Check the cooling water hoses for porosity and leakage.
5. Check the radiator's windshield for cracks and damage (visual check).
6. Check the rubber grommets for wear and cracks.
Figure 8.4: Radiator, typical
______________________________________________________
Chapter 8
Page 6
BRP-Rotax
REPAIR MANUAL
INSPECTION OF COOLING SYSTEM
Figure:
Radiator.
Cooling fins
1
Radiator cap
3
5
Radiator bracket
2
Radiator
Cooling water hose
4
Rubber grommet
6
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0