Removal Of The Piston - Rotax 125 MAX evo Repair Manual

REMOVAL OF THE PISTON

General See
Always support the piston with the hand in order to avoid a bending moment or damage
Special tools The following special tools and equipment are required:
Instructions Proceed as follows to remove the piston:
1. Pull out the circlip (2) with the circlip puller (1). Use safety goggles to protect your eyes!
2. Press the piston pin (4) out of the piston with the point of the special tool (3).
Figure 4.9: Piston
Chapter 4
Page 10
REPAIR MANUAL
Figure: piston.
In order to protect the piston pin circlip from unintentional loss, a suitable clean cloth
should be used to cover the open cylinder bore in the crankcase.
Part no.
676035
976380
Circlip puller
1
Special tool part no. 676035
3
BRP-Rotax
ATTENTION
ATTENTION
of the surface.
Description
Insertion tool
Circlip puller
2
4
Field of application
Piston
Circlip
Circlip
Piston pin
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0