Removal Of The Combustion Chamber Insert; Thermostat View - Rotax 125 MAX evo Repair Manual

Figure 4.4: Thermostat
______________________________________________________

REMOVAL OF THE COMBUSTION CHAMBER INSERT

Instruction See
1. Remove the combustion chamber insert (1) by unscrewing the 5 Hex screws M8x30 (4) with
the lock washer (5) crosswise.
2. Lift away the combustion chamber insert with lower (2) and upper O-rings (3).
Chapter 4
Page 6
BRP-Rotax
REPAIR MANUAL
Cylinder head cover
1
3 Thermostat holder
Thermostat retaining bracket
5
Figure: Combustion chamber
Thermostat, 45 Degree celcius
2
Compression spring
4
6 TAPTITE screw M4x8
insert.
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0