Con Rod Parts View - Rotax 125 MAX evo Repair Manual

Figure 5.13: Con rod parts
______________________________________________________
Instructions See
N N O O T T E E
Position the con rod above the bore of the bottom of the crankshaft repair jig. Oth-
erwise the con rod pin, the crankshaft half or the bottom section may be
damaged.
1. Push thrust plate (2) between the two halves of the crankshaft.
2. Position the crankshaft on the thrust plate (3) on bottom section of the tool (4) and make sure
that the crankshaft matches the bore in the bottom section at the crankshaft repair jig (4).
3. Position the thrust pin (5) on the connecting rod pin and press the crankshaft apart.
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
BRP-Rotax
REPAIR MANUAL
Part
685011
consisting of:
1
2
3
4
1 Con rod
Needle bearing
3
Figure: Disassembling of the
Part no.
217431
221162
232884
227731
Con rod pin
2
Thrust washer (2x)
4
crankshaft.
Description
Crankshaft repair kit (1x)
Con rod (1x)
Con rod pin (1x)
Needle bearing (1x)
Thrust washers (2x)
Chapter 5
Page 17