Instructions
1. Preferred version 1: screw in fixation tool for crankshaft (1) into the spark plug thread till the
end stop.
Figure 7.18: Fixation tools
______________________________________________________
2. Version 2: insert fixation tool assy. (3) into the starter gear assy. (1).
3. Lubricate taper of starter gear assy. (1) with LOCTITE 648.
4. Install starter gear assy. (1) onto crankshaft and tighten with hex. nut M28x1 SW 30 H=4.6
(2). Tightening torque 120 Nm (89 ft. lb).
5. Wipe away the surplus LOCTITE.
6. Install the clutch (4) with 3 Allen screws M6x12 (5) and secure with LOCTITE 648. Tighten-
ing torque 17 Nm (150 in. lb).
Chapter 7
Page 18
REPAIR MANUAL
Fixation tool (crankshaft)
1
BRP-Rotax
2
Fixation tool (starter gear)
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0