Rotax 125 MAX evo Repair Manual page 131

5. Fasten the puller assy. (1) to the starter gear assembly with 3 Allen screws M6x60 (2).
N N O O T T E E
Make sure the screws do not touch the housing. Do not screw them in too far.
6. Pull out starter gear assy. (3).
7. Remove starter reduction gear assy. (4) with the thrust washer (5) below.
Figure 7.10: Starter gear assy.
______________________________________________________
Chapter 7
Page 10
BRP-Rotax
REPAIR MANUAL
Puller assy.
1
Starter gear assy.
3
5 Thrust washer
2 Allen screws M6x60
Starter reduction gear
4
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0