Show Mls Qos Aggregate-Policer - Cisco Catalyst 3560-X Command Reference Manual

show mls qos aggregate-policer

show mls qos aggregate-policer
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-706
Downloaded from www.Manualslib.com
Use the show mls qos aggregate-policer user EXEC command to display the quality of service (QoS)
aggregate policer configuration. A policer defines a maximum permissible rate of transmission, a
maximum burst size for transmissions, and an action to take if either maximum is exceeded.
show mls qos aggregate-policer [aggregate-policer-name] [ | {begin | exclude | include}
expression]
aggregate-policer-name
| begin
| exclude
| include
expression
User EXEC
Release Modification
12.2(53)SE2 This command was introduced.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show mls qos aggregate-policer command:
Switch> show mls qos aggregate-policer policer1
aggregate-policer policer1 1000000 2000000 exceed-action drop
Not used by any policy map
Command
mls qos aggregate-policer
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
(Optional) Display the policer configuration for the specified name.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Description
Defines policer parameters that can be shared by multiple classes
within a policy map.
OL-21522-02