Show Platform Qos - Cisco Catalyst 3560-X Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform qos

Syntax Description
Command Modes
Command History
Usage Guidelines
OL-21522-02
Downloaded from www.Manualslib.com
Use the show platform qos privileged EXEC command to display platform-dependent quality of service
(QoS) information.
show platform qos {label asic number | policer {parameters asic number |
port alloc number asic number}} [ | {begin | exclude | include} expression]
label asic number
policer {parameters asic number |
port alloc number asic number}
| begin
| exclude
| include
expression
Privileged EXEC
Release
12.2(53)SE2
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
Display QoS label maps for the specified ASIC.
(Optional) For asic number, the range is 0 to 1.
Display policer information. The keywords have these
meanings:
• parameters asic number—Display parameter
information for the specified ASIC. The range is 0 to 1.
• port alloc number asic number—Display port allocation
information for the specified port and ASIC. The port
allocation range is 0 to 25. The ASIC range is 0 to 1.
(Optional) Display begins with the line that matches the
expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified
expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform qos
C-35