Cisco Catalyst 3560-X Command Reference Manual page 554

show boot
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-522
Downloaded from www.Manualslib.com
Command Description
boot auto-copy-sw Enables the automatic upgrade (auto-upgrade) process to automatically
upgrade a switch in version-mismatch (VM) mode.
This command is available only on stacking-capable switches.
boot Specifies the software image to use in the auto-upgrade process.
auto-download-sw
This command is available only on stacking-capable switches.
boot config-file Specifies the filename that Cisco IOS uses to read and write a nonvolatile
copy of the system configuration.
boot enable-break Enables interrupting the automatic boot process.
boot manual Enables manually booting the switch during the next boot cycle.
boot Specifies the filename that Cisco IOS uses to read and write a nonvolatile
private-config-file copy of the private configuration.
boot system Specifies the Cisco IOS image to load during the next boot cycle.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02