Mls Qos Srr-Queue Input Cos-Map - Cisco Catalyst 3560-X Command Reference Manual

mls qos srr-queue input cos-map

mls qos srr-queue input cos-map
Syntax Description
Defaults
Command Modes
Command History
Catalyst 3750-X and 3560-X Switch Command Reference
2-386
Downloaded from www.Manualslib.com
Use the mls qos srr-queue input cos-map global configuration command on the switch stack or on a
standalone switch to map class of service (CoS) values to an ingress queue or to map CoS values to a
queue and to a threshold ID. Use the no form of this command to return to the default setting.
mls qos srr-queue input cos-map queue queue-id {cos1...cos8 | threshold threshold-id
cos1...cos8}
no mls qos srr-queue input cos-map
queue queue-id Specify a queue number.
For queue-id, the range is 1 to 2.
cos1...cos8 Map CoS values to an ingress queue.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
threshold threshold-id Map CoS values to a queue threshold ID.
cos1...cos8
For threshold-id, the range is 1 to 3.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
Table 2-18 shows the default CoS input queue threshold map:
Table 2-18 Default CoS Input Queue Threshold Map
CoS Value Queue ID - Threshold ID
0–4 1–1
5 2–1
6, 7 1–1
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02