Cisco Catalyst 3560-X Command Reference Manual page 524

sdm prefer
Note
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
2-492
Downloaded from www.Manualslib.com
Table 2-23 Approximate Number of Feature Resources Allowed by IPv4 Templates
Resource
Unicast MAC addresses
Internet Group Management Protocol
(IGMP) groups and multicast routes
Unicast routes
Directly connected hosts
•
Indirect routes
•
Policy-based routing access control entries
(ACEs)
Quality of service (QoS) classification ACEs 0.5 K
Security ACEs
VLANs
Table 2-24 lists the approximate number of each resource supported in each of the dual IPv4-and
IPv6templates for a switch.
On switches running the LAN base feature set, routing values shown in all templates are not valid.
Table 2-24 Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates
Resource
Unicast MAC addresses
IPv4 IGMP groups and multicast routes
Total IPv4 unicast routes:
• Directly connected IPv4 hosts
Indirect IPv4 routes
•
IPv6 multicast groups
Directly connected IPv6 addresses
Indirect IPv6 unicast routes
IPv4 policy-based routing ACEs
IPv4 or MAC QoS ACEs (total)
IPv4 or MAC security ACEs (total)
IPv6 security ACEs
This example shows how to configure the access template on a switch:
Switch(config)# sdm prefer access
Switch(config)# exit
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Access Default
4 K 6 K
1 K 1 K
6 K 8 K
4 K 6 K
2 K 2 K
0.5 K 0
0.5 K
2 K 1 K
1 K 1 K
Default Routing VLAN
2 K 1.5 K 8 K
1 K 1 K 1 K for IGMP groups
0 for multicast routes
3 K 2.75 K 0
2 K 1.5 K 0
1 K 1.25 K 0
1 K 1 K 1 K
2 K 1.5 K 0
1 K 1.25 K 0
0 0.25 K 0
0.5 K 0.5 K 0.5 K
1 K 0.5 K 1 K
1 K 1 K 0.5 K
Routing VLAN
3 K 12 K
1 K 1 K
11 K 0
3 K 0
8 K 0
0.5 K 0
0.5 K 0.5 K
1 K 1 K
1 K 1 K
OL-21522-02