Cisco Catalyst 3560-X Command Reference Manual page 397

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Examples
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
This example shows how to enable QoS on the switch:
Switch(config)# mls qos
This example shows how to enable IPv6 QoS on the switch:
Switch(config)# sdm prefer dual-ipv4-and-ipv6 default
Switch(config)# end
Switch# reload
Switch# show sdm prefer
The current template is 'desktop IPv4 and IPv6 default' template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
number of IPv6 multicast groups:
number of directly-connected IPv6 addresses:
number of indirect IPv6 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
number of IPv6 policy based routing aces:
number of IPv6 qos aces:
number of IPv6 security aces:
Switch# configure terminal
Switch(config)# mls qos
You can verify your settings by entering the show mls qos privileged EXEC command.
Command
show mls qos
manuals search engine
2K
Description
Displays QoS information.
Catalyst 3750-X and 3560-X Switch Command Reference
1K
3K
2K
1K
1K
2K
1K
0
0.5K
1K
0
0.5K
0.5K
mls qos
2-365