Show Controllers Utilization - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show controllers utilization

Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
OL-21522-02
Downloaded from www.Manualslib.com
Use the show controllers utilization user EXEC command to display bandwidth utilization on
the switch or specific ports.
show controllers [interface-id] utilization [ | {begin | exclude | include} expression]
interface-id (Optional) ID of the switch interface.
| begin (Optional) Display begins with the line that matches the specified expression.
| exclude (Optional) Display excludes lines that match the specified expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
User EXEC
Release
12.2(53)SE2
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show controllers utilization command.
Switch> show controllers utilization
Port Receive Utilization
Gi1/0/1 0
Gi1/0/2 0
Gi1/0/3 0
Gi1/0/4 0
Gi1/0/5 0
Gi1/0/6 0
Gi1/0/7 0
<output truncated>
Gi2/0/1 0
Gi2/0/2 0
<output truncated>
Switch Receive Bandwidth Percentage Utilization
Switch Transmit Bandwidth Percentage Utilization : 0
Switch Fabric Percentage Utilization : 0
manuals search engine
Modification
This command was introduced.
Transmit Utilization
0
0
0
0
0
0
0
0
0
Catalyst 3750-X and 3560-X Switch Command Reference
show controllers utilization
: 0
2-553