Show Mac Address-Table Notification - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show mac address-table notification

Syntax Description
Command Modes
Command History
Usage Guidelines
OL-21522-02
Downloaded from www.Manualslib.com
Use the show mac address-table notification user EXEC command to display the MAC address
notification settings for all interfaces or the specified interface.
show mac address-table notification {change [interface [interface-id] | mac-move | threshold}
[ | {begin | exclude | include} expression]
change
interface
interface-id
mac-move
threshold
| begin
| exclude
| include
expression
User EXEC
Release
12.2(53)SE2
Use the show mac address-table notification change command without keywords to see if the MAC
address change notification feature is enabled or disabled, the MAC notification interval, the maximum
number of entries allowed in the history table, and the history table contents.
Use the interface keyword to display the notifications for all interfaces. If the interface-id is included,
only the flags for that interface appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
Display the MAC change notification feature parameters and the history
table.
(Optional) Display information for all interfaces. Valid interfaces include
physical ports and port channels.
(Optional) Display information for the specified interface. Valid interfaces
include physical ports and port channels.
Display status for MAC address move notifications.
Display status for MAC-address table threshold monitoring.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show mac address-table notification
2-683