Show Mls Qos Vlan - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:
Table of Contents

Advertisement

show mls qos vlan

show mls qos vlan
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-718
Downloaded from
www.Manualslib.com
Use the show mls qos vlan user EXEC command to display the policy maps attached to a switch virtual
interface (SVI).
show mls qos vlan vlan-id [ | {begin | exclude | include} expression]
vlan-id
Specify the VLAN ID of the SVI to display the policy maps. The range is 1 to
4094.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
User EXEC
Release
Modification
12.2(53)SE2
This command was introduced.
The output from the show mls qos vlan command is meaningful only when VLAN-based quality of
service (QoS) is enabled and when hierarchical policy maps are configured.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show mls qos vlan command:
Switch> show mls qos vlan 10
Vlan10
Attached policy-map for Ingress:pm-test-pm-2
Command
policy-map
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Description
Creates or modifies a policy map that can be attached to
multiple ports and enters policy-map configuration mode.
OL-21522-02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3750-x

Table of Contents