Debug Platform Phy - Cisco Catalyst 3560-X Command Reference Manual

debug platform phy

debug platform phy
Syntax Description
Defaults
Command Modes
Command History
Catalyst 3750-X and 3560-X Switch Command Reference
B-62
Downloaded from www.Manualslib.com
Use the debug platform phy privileged EXEC command to enable debugging of PHY driver
information. Use the no form of this command to disable debugging.
debug platform phy {automdix | cablediag | dual-purpose | flcd {configure | ipc | iter | trace} |
flowcontrol | forced | init-seq | link-status | read | sfp | show-controller | speed | write |
xenpak}
no debug platform phy {automdix | cablediag | dual-purpose | flcd {configure | ipc | iter | trace}
| flowcontrol | forced | init-seq | link-status | read | sfp | show-controller | speed | write |
xenpak}
automdix Display PHY automatic medium-dependent interface crossover (auto-MDIX)
debug messages.
cablediag Display PHY cable-diagnostic debug messages.
dual-purpose Display PHY dual-purpose event debug messages.
flcd {configure | ipc | Display PHY FLCD debug messages. The keywords have these meanings:
iter | trace}
•
•
•
•
flowcontrol Display PHY flowcontrol debug messages.
forced Display PHY forced-mode debug messages.
init-seq Display PHY initialization-sequence debug messages.
link-status Display PHY link-status debug messages.
read Display PHY-read debug messages.
sfp Display PHY small form-factor pluggable (SFP) modules debug messages.
show-controller Display PHY show-controller debug messages.
speed Display PHY speed-change debug messages.
write Display PHY-write debug messages.
xenpak Display PHY XENPAK debug messages
Debugging is disabled.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
manuals search engine
Appendix B
configure—Display PHY configure debug messages.
ipc—Display Interprocess Communication Protocol (IPC) debug
messages.
iter—Display iter debug messages.
trace—Display trace debug messages.
Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02