Show Switch - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show switch

Note
Syntax Description
Command Modes
Command History
OL-21522-02
Downloaded from www.Manualslib.com
Use the show switch user EXEC command to display information related to the stack member or the
switch stack.
show switch [stack-member-number | detail | neighbors | stack-ports [summary]| stack-ring
activity [detail] | speed] [ | {begin | exclude | include} expression]
This command is supported only on Catalyst 3750-X switches.
stack-member-number
detail
neighbors
stack-ports [summary] (Optional) Display port information for the entire switch stack. Use the
stack-ring activity
[detail]
stack-ring speed
| begin
| exclude
| include
expression
User EXEC
Release
12.2(53)SE2
manuals search engine
(Optional) Display information for the specified stack member. The range
is 1 to 9.
(Optional) Display detailed information about the stack ring.
(Optional) Display the neighbors for the entire switch stack.
summary keyword to display the stack cable length, the stack link status,
and the loopback status.
Optional) Display the number of frames per member that are sent to the
stack ring. Use the detail keyword to display the number of frames per
member that are sent to the stack ring, the receive queues, and the ASIC.
(Optional) Display the stack ring speed.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show switch
2-757