Debug Sw-Vlan - Cisco Catalyst 3560-X Command Reference Manual

Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands

debug sw-vlan

Syntax Description
Defaults
Command Modes
Command History
OL-21522-02
Downloaded from www.Manualslib.com
Use the debug sw-vlan privileged EXEC command to enable debugging of VLAN manager activities.
Use the no form of this command to disable debugging.
debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping |
notification | packets | redundancy | registries | vtp}
no debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping
| notification | packets | redundancy | registries | vtp}
badpmcookies
cfg-vlan {bootup | cli}
events
ifs
management
mapping
notification
packets
redundancy
registries
vtp
Debugging is disabled.
Privileged EXEC
Release
12.2(53)SE2
manuals search engine
Display debug messages for VLAN manager incidents of bad port manager
cookies.
Display config-vlan debug messages. The keywords have these meanings:
bootup—Display messages when the switch is booting up.
•
cli—Display messages when the command-line interface (CLI) is in
•
config-vlan mode.
Display debug messages for VLAN manager events.
See the debug sw-vlan ifs
Display debug messages for VLAN manager management of internal
VLANs.
Display debug messages for VLAN mapping.
See the debug sw-vlan notification
Display debug messages for packet handling and encapsulation processes.
Display debug messages for VTP VLAN redundancy.
Display debug messages for VLAN manager registries.
See the debug sw-vlan vtp
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
command.
command.
command.
debug sw-vlan
B-95