Cisco Catalyst 3560-X Command Reference Manual page 777

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
This is an example of output from the show sdm prefer vlan command:
Switch# show sdm prefer vlan
"desktop vlan" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups:
number of IPv4 multicast routes:
number of IPv4 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
This is an example of output from the show sdm prefer command when you have configured a new
template but have not reloaded the switch:
Switch# show sdm prefer
The current template is "desktop routing" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of igmp groups + multicast routes:
number of unicast routes:
number of directly connected hosts:
number of indirect routes:
number of qos aces:
number of security aces:
On next reload, template will be "desktop vlan" template.
Command
sdm prefer
manuals search engine
3K
1K
11K
3K
8K
0.5K
1K
Description
Sets the SDM template to maximize resources for routing or VLANs or to the
default template, to select a dual IPv4 and IPv6 template, or to select the
desktop templates.
Catalyst 3750-X and 3560-X Switch Command Reference
show sdm prefer
12K
1K
0
0
0
0.5K
1K
2-745