Cisco Catalyst 3560-X Command Reference Manual page 685

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Examples
Table 2-39
Field
State
LACP Port Priority
OL-21522-02
Downloaded from www.Manualslib.com
This is an example of output from the show lacp counters user EXEC command.
the fields in the display.
Switch> show lacp counters
LACPDUs
Port Sent
---------------------------------------------------------------------
Channel group:1
Gi2/0/1 19
Gi2/0/2 14
Table 2-38 show lacp counters Field Descriptions
Field
LACPDUs Sent and Recv
Marker Sent and Recv
Marker Response Sent and Recv
LACPDUs Pkts and Err
This is an example of output from the show lacp internal command:
Switch> show lacp 1 internal
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode
Channel group 1
Port Flags
Gi2/0/1 SA
Gi2/0/2 SA
Table 2-39 describes the fields in the display:
show lacp internal Field Descriptions
Description
State of the specific port. These are the allowed values:
• – —Port is in an unknown state.
bndl—Port is attached to an aggregator and bundled with other ports.
•
susp—Port is in a suspended state; it is not attached to any aggregator.
•
• hot-sby—Port is in a hot-standby state.
indiv—Port is incapable of bundling with any other port.
•
indep—Port is in an independent state (not bundled but able to switch data traffic. In this
•
case, LACP is not running on the partner port).
down—Port is down.
•
Port priority setting. LACP uses the port priority to put ports s in standby mode when there is
a hardware limitation that prevents all compatible ports from aggregating.
manuals search engine
Marker Marker Response
Recv Sent Recv
10 0 0
6 0 0
Description
The number of LACP packets sent and received by a port.
The number of LACP marker packets sent and received by a port.
The number of LACP marker response packets sent and received
by a port.
The number of unknown and illegal packets received by LACP
for a port.
P - Device is in Passive mode
LACP port Admin
State Priority Key
bndl 32768
bndl 32768
Catalyst 3750-X and 3560-X Switch Command Reference
LACPDUs
Sent Recv Pkts Err
0 0 0
0 0 0
Oper Port
Key Number
0x3 0x3 0x4
0x3 0x3 0x5
show lacp
Table 2-38 describes
Port
State
0x3D
0x3D
2-653