Cisco Catalyst 3560-X Command Reference Manual page 689

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Examples
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
This is an example of output from the show link state group 1 command:
Switch> show link state group 1
Link State Group: 1
This is an example of output from the show link state group detail command:
Switch> show link state group detail
(Up):Interface up (Dwn):Interface Down
Link State Group: 1 Status: Enabled, Down
Upstream Interfaces : Gi1/0/15(Dwn) Gi1/0/16(Dwn)
Downstream Interfaces : Gi1/0/11(Dis) Gi1/0/12(Dis) Gi1/0/13(Dis) Gi1/0/14(Dis)
Link State Group: 2 Status: Enabled, Down
Upstream Interfaces : Gi1/0/15(Dwn) Gi1/0/16(Dwn) Gi1/0/17(Dwn)
Downstream Interfaces : Gi1/0/11(Dis) Gi1/0/12(Dis) Gi1/0/13(Dis) Gi1/0/14(Dis)
(Up):Interface up (Dwn):Interface Down (Dis):Interface disabled
Command
link state group
link state track
show running-config
manuals search engine
Status: Enabled, Down
(Dis):Interface disabled
Description
Configures an interface as a member of a link-state group.
Enables a link-state group.
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comm
and_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
Catalyst 3750-X and 3560-X Switch Command Reference
show link state group
2-657