Cisco Catalyst 3560-X Command Reference Manual page 605

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
This is an example of output from the show env stack command on a stack master:
Switch> show env stack
SWITCH: 1
FAN 1 is OK
FAN 2 is OK
PS-FAN1 is OK
PS-FAN2 is OK
TEMPERATURE is OK
Temperature Value: 27 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 49 Degree Celsius
Red Threshold : 59 Degree Celsius
POWER is OK
RPS is AVAILABLE
<output truncated>
This example shows how to display the temperature value, state, and the threshold values on a standalone
switch. Table 2-33 describes the temperature states in the command output.
Switch> show env temperature status
Temperature Value: 33 Degree Celsius
Temperature State: GREEN
Yellow Threshold : 65 Degree Celsius
Red Threshold : 75 Degree Celsius
Table 2-33 States in the show env temperature status Command Output
State Description
Green The switch temperature is in the normal operating range.
Yellow The temperature is in the warning range. You should check the external temperature
around the switch.
Red The temperature is in the critical range. The switch might not run properly if the
temperature is in this range.
Command
power supply
manuals search engine
Description
Configures and manages the power supply modules on the switch.
Catalyst 3750-X and 3560-X Switch Command Reference
show env
2-573