Cisco Catalyst 3560-X Command Reference Manual page 808

show vmps
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-776
Downloaded from www.Manualslib.com
VQP Wrong Version:
VQP Insufficient Resource: 0
Table 2-52 show vmps statistics Field Descriptions
Field Description
VQP Queries Number of queries sent by the client to the VMPS.
VQP Responses Number of responses sent to the client from the VMPS.
VMPS Changes Number of times that the VMPS changed from one server to another.
VQP Shutdowns Number of times the VMPS sent a response to shut down the port. The client
disables the port and removes all dynamic addresses on this port from the
address table. You must administratively re-enable the port to restore
connectivity.
VQP Denied Number of times the VMPS denied the client request for security reasons. When
the VMPS response denies an address, no frame is forwarded to or from the
workstation with that address (broadcast or multicast frames are delivered to the
workstation if the port has been assigned to a VLAN). The client keeps the
denied address in the address table as a blocked address to prevent more queries
from being sent to the VMPS for each new packet received from this
workstation. The client ages the address if no new packets are received from this
workstation on this port within the aging time period.
VQP Wrong Domain Number of times the management domain in the request does not match the one
for the VMPS. Any previous VLAN assignments of the port are not changed.
This response means that the server and the client have not been configured with
the same VTP management domain.
VQP Wrong Version Number of times the version field in the query packet contains a value that is
higher than the version supported by the VMPS. The VLAN assignment of the
port is not changed. The switches send only VMPS Version 1 requests.
VQP Insufficient Number of times the VMPS is unable to answer the request because of a
Resource resource availability problem. If the retry limit has not yet been reached, the
client repeats the request with the same server or with the next alternate server,
depending on whether the per-server retry count has been reached.
Command Description
clear vmps statistics Clears the statistics maintained by the VQP client.
vmps reconfirm Sends VQP queries to reconfirm all dynamic VLAN assignments with the
(privileged EXEC) VMPS.
vmps retry Configures the per-server retry count for the VQP client.
vmps server Configures the primary VMPS and up to three secondary servers.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
0
OL-21522-02