Show Mls Qos Input-Queue - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show mls qos input-queue

Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
OL-21522-02
Downloaded from www.Manualslib.com
Use the show mls qos input-queue user EXEC command to display quality of service (QoS) settings
for the ingress queues.
show mls qos input-queue [ | {begin | exclude | include} expression]
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
User EXEC
Release
12.2(53)SE2
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show mls qos input-queue command:
Switch> show mls qos input-queue
Queue : 1
----------------------------------------------
buffers : 90
bandwidth : 4
priority : 0
threshold1: 100
threshold2: 100
manuals search engine
Modification
This command was introduced.
2
10
4
10
100
100
Catalyst 3750-X and 3560-X Switch Command Reference
show mls qos input-queue
2-707