Set - Cisco Catalyst 3560-X Command Reference Manual

set

set
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Catalyst 3750-X and 3560-X Switch Command Reference
2-500
Downloaded from www.Manualslib.com
Use the set policy-map class configuration command on the switch stack or on a standalone switch to
classify IP traffic by setting a Differentiated Services Code Point (DSCP) or an IP-precedence value in
the packet. Use the no form of this command to remove traffic classification.
set {dscp new-dscp | [ip] precedence new-precedence}
no set {dscp new-dscp | [ip] precedence new-precedence}
dscp new-dscp
[ip] precedence new-precedence New IP-precedence value assigned to the classified traffic. The
No traffic classification is defined.
Policy-map class configuration
Release Modification
12.2(53)SE2 This command was introduced.
If you have used the set ip dscp policy-map class configuration command, the switch changes this
command to set dscp in the switch configuration. If you enter the set ip dscp policy-map class
configuration command, this setting appears as set dscp in the switch configuration.
You can use the set ip precedence policy-map class configuration command or the set precedence
policy-map class configuration command. This setting appears as set ip precedence in the switch
configuration.
The set command is mutually exclusive with the trust policy-map class configuration command within
the same policy map.
For the set dscp new-dscp or the set ip precedence new-precedence command, you can enter a
mnemonic name for a commonly used value. For example, you can enter the set dscp af11 command,
which is the same as entering the set dscp 10 command. You can enter the set ip precedence critical
command, which is the same as entering the set ip precedence 5 command. For a list of supported
mnemonics, enter the set dscp ? or the set ip precedence ? command to see the command-line help
strings.
To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,
use the end command.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
New DSCP value assigned to the classified traffic. The range
is 0 to 63. You also can enter a mnemonic name for a commonly
used value.
range is 0 to 7. You also can enter a mnemonic name for a
commonly used value.
OL-21522-02