Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
ip device tracking
Syntax Description
Command Default
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
OL-21522-02
Downloaded from
www.Manualslib.com
To enable IP device tracking, use the ip device tracking global configuration command. Use the no form
of this command to disable this feature.
ip device tracking
no ip device tracking
This command has no arguments or keywords.
IP device tracking is disabled.
Global configuration
12.2(53)SE2
When IP device tracking is enabled, you can set the IP device tracking probe interval, count, and
configure the ARP probe address with the ip device tracking probe command.
Use the show ip device tracking all command to display information about entries in the IP device
tracking table. For more information about this command, see the Cisco IOS Security Command
Reference, Release 12.4T.
This example shows how to enable device tracking:
Switch(config)# ip device tracking
Switch(config)#
Command
ip device tracking probe
show ip device tracking all
manuals search engine
This command was introduced.
Description
Configures the IP device tracking table for ARP probes.
Displays information about the entries in the IP device tracking
table.
Catalyst 3750-X and 3560-X Switch Command Reference
ip device tracking
2-235