Reset - Cisco Catalyst 3560-X Command Reference Manual

reset

reset
Syntax Description
Command Modes
Command History
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
A-22
Downloaded from www.Manualslib.com
Use the reset boot loader command to perform a hard reset on the system. A hard reset is similar to
power-cycling the switch, clearing the processor, registers, and memory.
reset
This command has no arguments or keywords.
Boot loader
Release Modification
12.2(53)SE2 This command was introduced.
This example shows how to reset the system:
switch: reset
Are you sure you want to reset the system (y/n)?y
System resetting...
Command Description
boot Loads and boots an executable image and enters the command-line interface.
manuals search engine
Appendix A Catalyst 3750-X and 3560-X Switch Boot Loader Commands
OL-21522-02