Show Platform Stp-Instance - Cisco Catalyst 3560-X Command Reference Manual

show platform stp-instance

show platform stp-instance
Syntax Description
Command Modes
Command History
Usage Guidelines
Catalyst 3750-X and 3560-X Switch Command Reference
C-40
Downloaded from www.Manualslib.com
Use the show platform stp-instance privileged EXEC command to display platform-dependent
spanning-tree instance information.
show platform stp-instance vlan-id [ | {begin | exclude | include} expression]
vlan-id Display spanning-tree instance information for the specified VLAN. The range
is 1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
OL-21522-02