Show Platform Spanning-Tree - Cisco Catalyst 3560-X Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform spanning-tree

Syntax Description
Command Modes
Command History
Usage Guidelines
OL-21522-02
Downloaded from www.Manualslib.com
Use the show platform spanning-tree privileged EXEC command to display platform-dependent
spanning-tree information.
show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude |
include} expression]
synchronization Display spanning-tree state synchronization information. The keywords have
[detail | vlan these meanings:
vlan-id]
•
•
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release
12.2(53)SE2
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
detail—(Optional) Display detailed spanning-tree information.
vlan vlan-id—(Optional) Display VLAN switch spanning-tree information
for the specified VLAN. The range is 1 to 4094.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform spanning-tree
C-39