Mac Address-Table Static Drop - Cisco Catalyst 3560-X Command Reference Manual

mac address-table static drop

mac address-table static drop
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Catalyst 3750-X and 3560-X Switch Command Reference
2-348
Downloaded from www.Manualslib.com
Use the mac address-table static drop global configuration command on the switch stack or on a
standalone switch to enable unicast MAC address filtering and to configure the switch to drop traffic
with a specific source or destination MAC address. Use the no form of this command to return to the
default setting.
mac address-table static mac-addr vlan vlan-id drop
no mac address-table static mac-addr vlan vlan-id
mac-addr Unicast source or destination MAC address. Packets with this MAC address are
dropped.
vlan vlan-id Specify the VLAN for which the packet with the specified MAC address is
received. Valid VLAN IDs are 1 to 4094.
Unicast MAC address filtering is disabled. The switch does not drop traffic for specific source or
destination MAC addresses.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
Follow these guidelines when using this feature:
Multicast MAC addresses, broadcast MAC addresses, and router MAC addresses are not supported.
•
Packets that are forwarded to the CPU are also not supported.
If you add a unicast MAC address as a static address and configure unicast MAC address filtering,
•
the switch either adds the MAC address as a static address or drops packets with that MAC address,
depending on which command was entered last. The second command that you entered overrides the
first command.
For example, if you enter the mac address-table static mac-addr vlan vlan-id interface
interface-id global configuration command followed by the mac address-table static mac-addr
vlan vlan-id drop command, the switch drops packets with the specified MAC address as a source
or destination.
If you enter the mac address-table static mac-addr vlan vlan-id drop global configuration
command followed by the mac address-table static mac-addr vlan vlan-id interface interface-id
command, the switch adds the MAC address as a static address.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02