Debug Platform Fallback-Bridging - Cisco Catalyst 3560-X Command Reference Manual

debug platform fallback-bridging

debug platform fallback-bridging
Note
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
B-46
Downloaded from www.Manualslib.com
Use the debug platform fallback-bridging privileged EXEC command to enable debugging of the
platform-dependent fallback bridging manager. Use the no form of this command to disable debugging.
debug platform fallback-bridging [error | retry | rpc {events | messages}]
no debug platform fallback-bridging [error | retry | rpc {events | messages}]
This command is not supported on switches running the LAN base feature set.
error
retry
rpc {events | messages}
Debugging is disabled.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
If you do not specify a keyword, all fallback bridging manager debug messages appear.
The undebug platform fallback-bridging command is the same as the no debug platform
fallback-bridging command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Command Description
show debugging Displays information about the types of debugging that are enabled.
manuals search engine
Appendix B
(Optional) Display fallback bridging manager error condition messages.
(Optional) Display fallback bridging manager retry messages.
(Optional) Display fallback bridging debugging information. The
keywords have these meanings:
events—Display remote procedure call (RPC) events.
•
messages—Display RPC messages.
•
Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02