Cisco Catalyst 3560-X Command Reference Manual page 150

cluster commander-address
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-118
Downloaded from www.Manualslib.com
This is partial sample output from the running configuration of a cluster member.
Switch(config)# show running-configuration
<output truncated>
cluster commander-address 00e0.9bc0.a500 member 4 name my_cluster
<output truncated>
This example shows how to remove a member from the cluster by using the cluster member console.
Switch # configure terminal
Enter configuration commands, one per line.
Switch(config)# no cluster commander-address
You can verify your settings by entering the show cluster privileged EXEC command.
Command Description
show cluster Displays the cluster status and a summary of the cluster to which the switch
belongs.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
End with CNTL/Z.
OL-21522-02