Boot Helper-Config-File - Cisco Catalyst 3560-X Command Reference Manual

boot helper-config-file

boot helper-config-file
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-74
Downloaded from www.Manualslib.com
Use the boot helper-config-file global configuration command on the switch stack or on a standalone
switch to specify the name of the configuration file to be used by the Cisco IOS helper image. If this is
not set, the file specified by the CONFIG_FILE environment variable is used by all versions of Cisco
IOS that are loaded. Use the no form of this command to return to the default setting.
boot helper-config-file filesystem:/file-url
no boot helper-config file
filesystem:
/file-url
No helper configuration file is specified.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see Appendix A "Catalyst 3750-X and 3560-X Switch Boot Loader Commands."
Command Description
show boot Displays the settings of the boot environment variables.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Alias for a flash file system. Use flash: for the system board flash
device.
The path (directory) and helper configuration file to load.
OL-21522-02