Show Controllers Utilization - Cisco ME 3800X Command Reference Manual

Chapter

show controllers utilization

To display bandwidth utilization on the switch or specific ports, use the show controllers utilization
command in user EXEC mode.
Syntax Description interface-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(52)EY
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers utilization command.
Switch> show controllers utilization
Port
Gi0/1
Gi0/2
Gi0/3
Gi0/4
Gi0/5
Gi0/6
Gi0/7
Gi0/8
Gi0/9
Gi0/10
Gi0/11
Gi0/12
Gi0/13
Gi0/14
Gi0/15
Gi0/16
Gi0/17
Gi0/18
Gi0/19
Gi0/20
Gi0/21
Gi0/22
Gi0/23
OL-28238-01
show controllers [interface-id] utilization [ | {begin | exclude | include} expression]
(Optional) ID of the switch interface.
(Optional) Display begins with the line that matches the specified expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Receive Utilization
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Transmit Utilization
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Cisco ME 3800X and ME 3600X Switch Command Reference
show controllers utilization
-43