Clear Spanning-Tree Counters - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

clear spanning-tree counters

Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
Use the clear spanning-tree counters privileged EXEC command on the switch stack or on a standalone
switch to clear the spanning-tree counters.
clear spanning-tree counters [interface interface-id]
interface interface-id
No default is defined.
Privileged EXEC
Release
12.2(53)SE2
If the interface-id is not specified, spanning-tree counters are cleared for all interfaces.
This example shows how to clear spanning-tree counters for all interfaces:
Switch# clear spanning-tree counters
Command
show spanning-tree
manuals search engine
(Optional) Clear all spanning-tree counters on the specified interface. Valid
interfaces include physical ports, VLANs, and port channels. The VLAN
range is 1 to 4094. The port-channel range is 1 to 48.
Modification
This command was introduced.
Description
Displays spanning-tree state information.
Catalyst 3750-X and 3560-X Switch Command Reference
clear spanning-tree counters
2-113