Show Controllers Utilization - Cisco Catalyst Blade Switch 3130 Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands

show controllers utilization

Use the show controllers utilization user EXEC command to display bandwidth utilization on
the switch or specific ports.
Syntax Description
interface-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(40)EX1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers utilization command.
Switch> show controllers utilization
Port
Gi1/0/2
Gi1/0/3
Gi1/0/4
Gi1/0/5
Gi1/0/6
Gi1/0/7
<output truncated>
Gi2/0/1
Gi2/0/2
<output truncated>
Switch Receive Bandwidth Percentage Utilization
Switch Transmit Bandwidth Percentage Utilization : 0
Switch Fabric Percentage Utilization : 0
OL-13271-01
show controllers [interface-id] utilization [ | {begin | exclude | include} expression]
(Optional) ID of the switch interface.
(Optional) Display begins with the line that matches the specified expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Receive Utilization
0
0
0
0
0
0
0
0
Transmit Utilization
0
0
0
0
0
0
0
0
: 0
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
show controllers utilization
2-413