Selecting Values - Danfoss Vacon NXP Series Operating Manual

Operating guide | VACON® NXS/NXP Air-cooled
Procedure
1. To find the Parameter menu, scroll down in the main menu until the location indication M2 shows on the first line of the display.
Parameters
2. Push the Menu button Right to move into the Parameter Group Menu (G#).
Input signals
3. To find the parameter group, use the Browser buttons Up and Down.
Input signals
4. Use the Browser buttons Up and Down to find the parameter (P#) to edit. To move directly from the last parameter of a parameter
group to the first parameter of that group, push the Browser button Up.
Min Frequency

8.3.2 Selecting Values

Context:
Use these instructions to edit the text values on the control panel.
The basic application package "All in One+" includes 7 applications with different sets of parameters. For more information, see
®
VACON All in One Application Manual.
88 | Danfoss A/S © 2018.06
READY
Keypad
G1 G8
READY
Keypad
G1 G8
READY
Keypad
P1 P18
READY
Keypad
13.95 Hz
Using the Control Panel
DPD00910G