Installing The Cables, Fr9 - Danfoss Vacon NXP Series Operating Manual

Operating guide | VACON® NXS/NXP Air-cooled
1
2
1 Standard
Illustration 25:
8. Attach the cover of the drive. For the tightening torques of the screws, see

6.5.5 Installing the Cables, FR9

Context:
Follow these instructions to install the cables.
For information on how to comply with the UL regulations in cable installations, see
If it is necessary to connect an external brake resistor, see VACON
Resistor Connection.
Prerequisites:
Make sure that the delivery contains all necessary components.
Open the covers according to instructions in
66 | Danfoss A/S © 2018.06
FR8
6.4.6 Get Access and Locate the Terminals for
2 PROFIBUS
12.5 Tightening Torques for Cover
6.1.2 UL Standards on
®
Brake Resistor Manual. See also
FR9.
Electrical Installation
Screws.
Cabling.
8.7.8.2 Setting the Internal Brake
DPD00910G