Danfoss Vacon NXP Series Operating Manual page 168

Operating guide | VACON® NXS/NXP Air-cooled
Fault Fault
code
74 Follower fault
1
It is possible to set different responses in the application for these faults. See parameter group Protections.
2
A faults (alarms) only.
168 | Danfoss A/S © 2018.06
Subcode Possible cause
in T.14
When using normal Master Follower
function this fault code is given if one
or more follower drives trip to fault.
How to correct the fault
Specifications
DPD00910G