Danfoss Vacon NXP Series Operating Manual page 6

Operating guide | VACON® NXS/NXP Air-cooled
9 Commissioning
9.1 Safety Checks before Starting the Commissioning
9.2 Commissioning the AC Drive
9.3 Measuring the Cable and Motor Insulation
9.3.1 Insulation Checks of the Motor Cable
9.3.2 Insulation Checks of the Mains Cable
9.3.3 Insulation Checks of the Motor
9.4 Checks after Commissioning
9.4.1 Testing the AC Drive after Commissioning
9.4.2 RUN Test without Load
9.4.3 Start-up Test
9.4.4 Identification Run
10 Maintenance
10.1 Maintenance Schedule
10.2 Reforming the Capacitors
11 Fault Tracing
11.1 General Information on Fault Tracing
11.2 Resetting a Fault
11.3 Creating Service Info File
12 Specifications
12.1 Weights of the AC Drive
12.2 Dimensions
12.2.1 List of Dimension Information
12.2.2 Wall-mounted
12.2.3 Flange mounting
12.2.4 Standalone
12.3 Cable and Fuse Sizes
12.3.1 List of Cable and Fuse Size Information
12.3.2 Cable and Fuse Sizes for 208-240 V and 380-500 V, FR4 to FR9
12.3.3 Cable and Fuse Sizes for 208-240 V and 380-500 V, FR4 to FR9, North America
12.3.4 Cable and Fuse Sizes for 525-690 V, FR6 to FR9
12.3.5 Cable and Fuse Sizes for 525-690 V (UL Rating 600 V), FR6 to FR9, North America
12.3.6 Cable and Fuse Sizes for 380-500 V, FR10 to FR11
12.3.7 Cable and Fuse Sizes for 380-500 V, FR10 to FR11, North America
12.3.8 Cable and Fuse Sizes for 525-690 V, FR10 to FR11
12.3.9 Cable and Fuse Sizes for 525-690 V (UL Rating 600 V), FR10 to FR11, North America
12.4 Cable Stripping Lengths
12.5 Tightening Torques for Cover Screws
12.6 Tightening Torques of the Terminals
6 | Danfoss A/S © 2018.06
Contents
116
116
117
118
118
119
119
120
120
120
121
121
122
122
122
123
123
123
124
125
125
125
125
126
130
136
137
137
137
138
140
141
142
142
143
144
144
146
146
DPD00910G