Danfoss Vacon NXP Series Operating Manual page 98

Operating guide | VACON® NXS/NXP Air-cooled
Code Function
S6.2 Application selection
S6.3 Copy parameters
S6.3.1 Parameter sets
S6.3.2 Load up to keypad
S6.3.3 Load down from keypad
P6.3.4 Parameter back-up
S6.4 Compare parameters
S6.4.1 Set1
S6.4.2 Set 2
S6.4.3 Factory settings
S6.4.4 Keypad set
S6.5 Security
S6.5.1 Password
P6.5.2 Parameter lock
S6.5.3 Start-up wizard
98 | Danfoss A/S © 2018.06
Min Max Unit
Using the Control Panel
Default Cust Description
Basic applica- Basic application
tion
Standard application
Local/Remote control appl.
Multi-Step application
PID Control application
Multi-Purpose Control appl.
Pump and Fan Control
appl.
Store set 1
Load set 1
Store set 2
Load set 2
Load factory defaults
All parameters
All parameters
All but motor parameters
Application parameters
Yes Yes
No
Not used
Not used
Not used 0 = Not used
Change Ena- Change Enabled
bled
Change Disabled
No
Yes
DPD00910G