Update Firmware - Siemens CP-8000 User Manual

Engineering via SICAM WEB
9.3.7

Update Firmware

With this function you are able to load the most recent
Select thereto the submenu Update firmware .
You have the possibility to abort the procedure.
· Click Select a file in order to open the selection dialog
·
Select the source directory and the source file (the file type must be *.bin)
·
Click on the button
The target device starts the loading procedure. The duration of the loading procedure de-
pends on the file size and the used communication connection.
Note
During loading procedures the website must not be left. The selection of another website may lead to the
occurrence of undefined states.
Subsequently the file is checked upon validity. If the data is valid, it is written on the SD card
of the target device. Otherwise, an error information is displayed.
After successful upload the following dialog appears:
·
Click on the button
464
Unrestricted
firmwares into the target device.
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017